9 min read

Aravind SundarAravind Sundar

How to Improve Google Ads Search Terms Quality

Improve google ads search terms quality by tightening query control, using search term insights, and adding negative keywords; brand queries drove over half of conversions on just over a third of spend.

How to Improve Google Ads Search Terms Quality

Wasting budget on Google Ads?

Book a free 30-min call — we'll show you exactly where it's leaking.

Related service: GA4 & GTM Audit service

Book a call

One audit finding tells you almost everything you need to know: brand queries were driving more than half of conversions while using just over a third of spend. That looks healthy until you separate the traffic and realize the non-brand side may be carrying a very different story.

Improving google ads search terms quality is mostly about reducing ambiguity. You need cleaner query control, better use of search term insights, and a negative keyword process that doesn’t wait until waste has already piled up.

The tricky part is that most accounts don’t fail because of one huge mistake. They fail because of a dozen small ones that compound — loose matching, weak conversion signals, brand traffic muddying the read, and slow reactions to query patterns that were visible days ago.

1) Why Search Terms Get Messy So Fast

Search term quality breaks down when the account gives the auction too much room to interpret intent. That usually happens when match types are loose, campaign structure is broad, or the conversion signal is noisy enough that the system keeps chasing the wrong traffic. Once that starts, the query mix drifts fast.

There’s also a measurement problem. Research from two account audits found that brand searches drove over half of conversions on just over a third of spend. That kind of mix can make performance look stronger than it is, especially if you’re judging non-brand campaigns on blended CPA alone. A recent guide on hidden account settings also notes that less-obvious settings can quietly hurt performance if nobody checks them.

  • Broad query matching can pull in adjacent intent that looks relevant on paper but converts poorly in practice.
  • Brand traffic can flatter account-level metrics by carrying a disproportionate share of conversions, as shown in the audit findings.
  • Low-value conversion actions train bidding systems to optimize toward activity, not revenue.
  • Hidden account settings can widen traffic reach or blur reporting if they go unchecked.
  • Search term data is often delayed, so teams react after waste has already accumulated.

The point isn’t to eliminate exploration. It’s to make sure the account is exploring inside a box you actually want. If you don’t define that box, the system will define it for you — and it usually won’t be as selective as you’d like.

2) Build Better Query Control Before You Touch Bids

Most teams rush to bid changes when the real problem is query control. If the account is matching to the wrong searches, a smarter bid strategy just scales the mistake. Fix the inputs first.

Start by separating intent tiers. Brand, non-brand high intent, research intent, and competitor-style traffic all behave differently, and they shouldn’t be judged with the same CPA target. That separation makes it easier to see where search term quality is slipping and where the account is actually healthy.

  • Split brand and non-brand traffic so brand conversions don’t mask weak prospecting performance.
  • Group high-intent terms away from research terms, since those two buckets usually have very different conversion rates.
  • Review account settings that can expand reach or change how queries are matched.
  • Keep conversion actions focused on outcomes that matter, not every micro-step in the funnel.
  • Use tighter ad group themes where query intent is narrow and predictable.

This is where most accounts get cleaner very quickly. When you stop mixing different kinds of intent in the same bucket, the bad queries become obvious. For instance, a campaign that was “performing” at the account level may reveal that only one segment is actually carrying the business while the rest is soaking up budget.

3) Use Search Term Insights Like an Analyst, Not a Collector

Search term insights are only useful if you turn them into decisions. A lot of teams export query data, skim it, and move on. That’s not analysis. That’s filing.

The better approach is to look for patterns, not one-off oddities. Which themes show up repeatedly? Which queries spend money without producing meaningful conversions? Which terms are close enough to your target intent that they deserve their own ad group, and which ones should be blocked immediately?

  • Review query data on a fixed cadence, such as weekly for active accounts and more often during launch periods.
  • Flag recurring irrelevant themes, not just single bad queries.
  • Separate “no conversion yet” from “bad intent” — those are not the same thing.
  • Look for queries that produce cheap clicks but weak downstream quality.
  • Use search term insights to identify new high-intent themes worth isolating.

One practical rule helps here: if a query appears once, it’s a data point. If it appears five times across different ad groups, it’s a pattern. That distinction matters because patterns tell you where the account structure is leaking intent, while isolated queries usually just tell you the auction is messy.

4) Negative Keywords Need a System, Not a Panic Button

Negative keywords are the fastest way to clean up search term quality, but only if you use them with discipline. Too many accounts treat negatives as a cleanup task after the damage is done. By then, you’ve already paid for the lesson.

Build negatives in layers. Some belong at campaign level because they’re universally irrelevant. Others belong at ad group level because they block one intent bucket while preserving another. If you don’t separate those two, you’ll either over-block useful traffic or under-block obvious waste.

  • Add universal negatives for terms that never fit the offer, such as job-seeker, free, or DIY-style intent when those searches don’t convert.
  • Use ad group negatives to prevent internal overlap between closely related themes.
  • Review search term reports before adding broad negatives, since one word can block useful variants.
  • Track negative additions by theme so you can see what kind of waste keeps recurring.
  • Revisit old negatives periodically, because product lines and offers change.

The best negative keyword process is boring in the right way. It’s consistent, documented, and tied to actual query behavior. If you’re only adding negatives when someone notices waste in a meeting, the account is already behind.

5) Match Type and Structure Still Matter in 2026

As of 2026, many accounts rely more heavily on automated bidding and broader matching than they did a few years ago. A recent optimization guide notes that changing bids too quickly and chasing the wrong signals are common ways teams make performance worse. That matters here because broader matching can work, but only when the structure around it is tight.

The answer isn’t to go back to rigid, old-school control everywhere. It’s to use match type and campaign design intentionally. Some themes deserve tighter matching because the intent is narrow and the economics are unforgiving. Others can tolerate broader reach because the conversion rate is stable enough to absorb exploration.

  • Narrow-intent offers usually need tighter query control than broad educational offers.
  • Broader matching works better when conversion data is clean and plentiful.
  • Separate campaigns by commercial intent when the value per lead or sale varies sharply.
  • Use tighter themes where one irrelevant query can burn meaningful budget.
  • Test structure changes in controlled segments instead of rewriting the whole account at once.

Here is what that looks like in practice: a high-value service campaign may need a much tighter query boundary than a top-of-funnel content campaign. Same account, different tolerance for noise. If you ignore that difference, you’ll either starve good traffic or flood the account with junk.

6) Fix the Measurement Before You Judge the Queries

Search term quality looks worse when conversion tracking is sloppy. If the account counts low-value actions as wins, the system will optimize toward the wrong searches. If offline quality never makes it back into the account, you’ll keep rewarding traffic that only looks good on the surface.

This is where a lot of teams get trapped. They see a high conversion volume, assume the queries are strong, and then wonder why sales quality is weak. The issue isn’t always the search term. Sometimes it’s the conversion definition.

  • Track only meaningful primary conversions in bidding, not every form fill or button click.
  • Separate lead quality signals from raw lead volume when possible.
  • Use offline outcomes to identify which search themes actually produce revenue.
  • Audit conversion settings when performance changes suddenly without a clear traffic reason.
  • Watch for brand-heavy accounts where easy conversions distort the read on non-brand search terms.

If the account can’t tell the difference between a good lead and a bad one, your query analysis will always be half blind. Better query control helps, but measurement discipline is what keeps the system honest.

7) Turn Search Term Cleanup Into a Weekly Operating Rhythm

The accounts with the cleanest search term quality usually aren’t the ones with the fanciest setup. They’re the ones with a repeatable operating rhythm. Someone checks the query data, someone decides what to block, and someone reviews whether the structure still matches the business.

That rhythm matters because search behavior changes. New terms emerge, old ones drift, and seasonality can make a previously strong query turn weak. If you only review queries when performance falls apart, you’re managing by fire drill.

  • Set a weekly review cadence for active spend and a faster cadence during launches or major changes.
  • Assign ownership for query review, negative keyword updates, and structural changes.
  • Track recurring waste themes so you can fix root causes, not just symptoms.
  • Re-check brand and non-brand splits when account performance shifts.
  • Document why a negative was added so future changes don’t undo the fix.

The real win here is compounding. A good weekly process doesn’t just remove waste. It teaches the account what not to buy, which makes every future optimization easier. That’s how search term quality improves over time instead of slipping back into chaos.

Final Takeaway

Improving google ads search terms quality is mostly about reducing ambiguity. The cleaner the intent boundaries, the better the system can learn, and the less money you waste on queries that were never going to convert.

If you want better results this year, start with structure, then move to search term insights, then build a real negative keyword process. Don’t reverse that order. Most accounts don’t need more bidding pressure — they need fewer bad queries getting through the door.

FAQs

What is a good way to judge search term quality?

Look at more than conversion volume. A strong query should bring in the right intent, produce acceptable cost per qualified outcome, and fit the commercial goal of the campaign. If a term converts but the leads are weak, it’s not a good term. If it spends without any meaningful downstream value, it should be reviewed for exclusion.

How often should I review search term insights?

Weekly is a solid baseline for active accounts, and more often during launches or major budget changes. Fast-moving accounts can generate waste quickly, so waiting a month is usually too slow. The key is consistency, not perfection. A regular review cadence catches patterns before they become expensive habits.

Should I add negative keywords at the campaign or ad group level?

Both, but for different reasons. Campaign-level negatives are best for terms that never fit the offer anywhere in the account. Ad group negatives are better when you need to block overlap between closely related themes. If you use only one level, you’ll either over-block or leave too much waste in place.

Why do brand searches make performance look better than it is?

Brand traffic usually converts more easily because the user already knows the business. That can make blended CPA look strong even when non-brand traffic is underperforming. Research from two audits found brand searches driving more than half of conversions on just over a third of spend, which is exactly why you should separate the two. If you don’t, you may think the account is healthier than it really is.

Can broader matching work if I’m trying to improve search term quality?

Yes, but only if the account has strong conversion signals and tight structural guardrails. A recent optimization guide warns that weak signals and rushed bid changes can make performance worse, which is the same risk you face with loose query control. Broader matching works best when you already know which themes matter and you’re actively filtering the rest. If the account is messy, broader matching usually makes the mess bigger.

What’s the biggest mistake teams make with search term cleanup?

In my view, they treat it like a one-time cleanup task instead of an operating system. They add a few negatives, feel better, and then stop watching the query mix. Search behavior keeps changing, so the account needs ongoing review. The teams that win are the ones that keep tightening the loop.

Book a Call With y77.ai

If your search term reports are noisy, your CPA is being distorted by the wrong traffic, or your negative keyword process is more reactive than strategic, we can help. y77.ai helps businesses grow through AI-powered SEO and content strategies, and we bring the same analytical discipline to paid search measurement and optimization. We’ll help you clean up query quality, sharpen intent, and build a system that keeps waste from creeping back in. Book a call with y77.ai today.

Tags
search term insightsnegative keywordsgoogle ads search termspaid search optimizationsearch term qualitygoogle ads auditquery intentsearch query analysiscampaign structureconversion trackingbrand trafficnon-brand trafficppc measurementsearch engine marketinggoogle ads optimization
Share
Need support?

Let’s turn insights into the next round of wins.

We can audit your telemetry stack, unblock campaigns, or architect the next measurement sprint in as little as two weeks.